A blind flange is a solid disc with bolt holes that closes the end of a pipe, valve or vessel nozzle. It is also used to isolate sections of a line for testing or maintenance.
Why blind flanges are thick
The full system pressure acts on the whole face of a blind flange, while an open flange only carries the load around its bore. For this reason blind flanges in larger sizes and higher ratings are among the heaviest flanges in a piping system.
Standards
- ASME B16.5 blind flanges, NPS 1/2 to 24, Class 150 to 2500
- ASME B16.47 Series A and B for NPS 26 and larger
- EN 1092-1 Type 05, DIN 2527 and JIS B2220 BL for metric systems
Options to specify
- Facing: RF, FF or RTJ, matching the mating flange
- Tapped centre hole for draining, venting or instruments, if needed
- Lifting lugs or eye bolt holes for heavy sizes
- Material grade and certificate level
For test blinds and spectacle blinds, the design may follow a different standard (for example ASME B16.48), so state it clearly in the RFQ.
About Hyupshin Flanges
Shandong Hyupshin Flanges Co., Ltd has manufactured forged steel flanges since 1988 and exports more than 90% of its production. Monthly output is about 2,000 tons, with a supply range of DN15 to DN3000. Orders are supplied with EN 10204 3.1 material certificates, and third-party inspection can be arranged. Certifications include ISO 9001, Korea KS, CE PED, UKCA, AD 2000, LRQA.
See the ASME B16.5 blind flange dimensions, or send your RFQ, drawing or item list. Minimum order is 1 ton or 100 pieces.