New Development – Hyupshin New Workshop
Total build area 2000 sq.m. The estimated date of completion: July 20, 2011.
Read more
The Sales Manager of Jinan Hyupshin Flanges Co., Ltd
Email: austin@hyupshin.cn
Skype: iguorui
WeChat: hyupshin
QQ: 1606229856
What's App: 13969085317
Tel: +86-531-83297728-8001
Production Stop and Technology Renewal
From beginning of April, the factory of Hyupshin Flanges would be stopped to produce flanges, size from DN15-DN100, we will make the produce technology renewal for flanges, the time will last for 2 month, in the period of technology renewal we will not accept new order for flanges, after the technology renewal, the produce will improve…
New Lathes – hydraulic Flanges Lathes
New Hydraulic Flanges Lathes for flanges producing speed, improve about 30% speed than common lathes.
ASME/ANSI B16 – Standards of Pipes and Fittings
The ASME – American Society of Mechanical Engineers – ASME/ANSI B16 Standards covers pipes and fittings in cast iron , cast bronze, wrought copper and steel. ASME/ANSI B16.1 – 1998 – Cast Iron Pipe Flanges and Flanged Fittings This Standard for Classes 150, 300, 600, 900, 1500, and 2500 Cast Iron Pipe Flanges and Flanged…
Pipe Flanges and Gasket Dimensions
Gasket dimensions for pipe flanges and flange fittings ASME B16.5 Pipe Flanges and Flange Fittings Gasket dimensions for ASME B16.5 Pipe Flanges and Flange Fittings – can be found in the table below. Nominal Pipe Size Gasket Inside Diameter (ID) (inch) Gasket Outside Diameter (OD) (inches) Class 300 Class 400 Class 600 Class 900 1/2…
Pipe Flange Types and Kinds
Pipe Flanges A pipe flange is disc, collar or ring that attaches to pipe with the purpose of providing increased support for strength, blocking off a pipeline or implementing the attachment of more items. Pipe flanges are usually welded or screwed to the pipe end and are connected with bolts. A gasket is inserted between…
Pipe flanges
There are many different flange standards to be found worldwide. To allow easy functionality and inter-changeability, these are designed to have standardised dimensions. Common world standards include ASA/ANSI (USA), PN/DIN (European),[1] BS10 (British/Australian),[2] and JIS/KS (Japanese/Korean). In most cases these are not interchangeable (e.g. an ANSI flange will not mate against a JIS flange). Further,…
Pipe-to-pipe connections between different joint types
Molded raised faces for swaged PP-lined pipe are shown in many connections illustrated here, however, reinforced flared faces (PVDF and PTFE) may be used in most of the same connections. Note: Normally no gaskets are required between plastic lined piping components. When lined piping is connected to a flange face of another material, a gasket…