| Basic requirements for Material and Flange | ||
| Requirements are valid for normal situation, in special you have to contact us to introduce. | ||
| Material | Test basis / Requirements | Delivery Condition |
| C 22.8 (1.0460) | DIN 17243: 01.87 + VdTUEV – WB 350/3: 2009 | +N |
| DIN 17243: 01.87 | ||
| VdTÜV – WB 350/3: 2009 | ||
| P250GH (1.0460) | DIN EN 10222-2: 04.2000 | +N |
| National Annex | ||
| P245GH (1.0352) | EN 10222-2:1999-12 + AC : 2000-02 | +N |
| A105N / C21 | ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04 | +N |
| + VdTUEV399/3: 1996-09 | ||
| + NACE MR 0175: 2000 | ||
| A105N | ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04 | +N |
| + NACE MR 0175: 2000 | ||
| C21 (1.0432) | VdTUEV – WB 399/3: 1996-09 | +N |
| RSt 37-2 (1.0038) | DIN 17100: 1980-01 | +N |
| S235JR (1.0038) | DIN EN10025-2: 2005-04 | +N |
| 16Mo3 (1.5415) | DIN EN10222-2:1999-12 + AC:2000-02 | +N |
| WStE355 / TStE355 | DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06 | +N or QT |
| (1.0565 / 1.0566) | ||
| P355NH (1.0565) | DIN EN10222-4: 1998 + A1: 2002-12 | +N |
| WStE355 / P355NH | DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06 | +N or QT |
| (1.0565) | + DIN EN10222-4: 1998 + A1: 2002-12 | |
| + DIN EN17103 :1989-10 | ||
| + DIN EN10222-4: 1998 + A1: 2002-12 | ||
| 1.4301 (X5CrNi17-10) | DIN EN10222-5: 2000-02 | +AT |
| 1.4306 (X2CrNi19-11) | DIN 17440:1996-09 | +AT |
| 1.4401 (X5CrNiMo17-12-2) | DIN EN10222-5: 2000-02 | +AT |
| 1.4404 (X2CrNiMo17-12-2) | DIN EN10222-5: 2000-02 | +AT |
| 1.4432 (X2CrNiMo17-12-3) | DIN EN10222-5: 2000-02 | +AT |
| 1.4541 (X6CrNiTi18-10) | DIN EN10222-5: 2000-02 | +AT |
| 1.4571 (X6CrNiMoTi17-12-2) | DIN EN10222-5: 2000-02 | +AT |
| 1.4541 / F321 | DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005 | +AT |
| 1.4571 / F316Ti | DIN EN10222-5: 2000-02 / +ASTM A 240 | +AT |
| 1.4404 / F316L | DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005 | +AT |
| 1.4306 / F304L | DIN 17440.1996-09 / +ASTM A 182/A 182M : 2005 | +AT |
| 1.4307 / F304L | DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005 | +AT |
| Flange | Test basis / Requirements | |
| DIN, Carbon Steel | DIN2519:1991-06 | |
| + AD2000-W9: 02.04; -W13/ TRD107;TRB100; | ||
| + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02 | ||
| DIN, corrosion-resistant Steel | DIN2519:1991-06 | |
| + AD2000-W9: 02.04; -W2; -W10 / TRD107; TRB100; | ||
| + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02 | ||
| DIN EN 1092-1, Carbon Steel | DIN EN 1092-1: 2008-09 | |
| + AD2000-W9; -W13/TRD107;TRB100 | ||
| + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02 | ||
| DIN EN 1092-1, Stainless Steel | DIN EN 1092-1: 2008-09 | |
| + AD2000-W9; -W2; -W10/ TRD107; TRB100 | ||
| + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02 | ||
| ANSI | ASME B16.5:2003 | |
| ASME B16.47:2006 | ||
| Basic requirements for Material and Fitting | ||
| Requirements are valid for normal case, in special case you have to contact the technical department. | ||
| Material | Test basis / Requirements | Delivery Condition |
| 1.4541 (X6CrNiTi18-10) | DIN 17458:1996-09 | +AT |
| 1.4571 (X6CrNiMoTi17-12-2) | DIN 17458:1996-09 | +AT |
| Fittings | Test basis / Requirements | |
| DIN2609 Stainless Steel | VdTUEV –MB 1252/ AD2000- W2; W10/TRD107;TRB100 | |
| T-Piece | Directive 97/23/EG Annex I, Chap. 4.3:1998-02 | |
| Bow | DIN2615-1 | |
| Reducer | DIN2605-1 | |










Never thought blogging could be soo fun and interesting. Man you know how to do it brother.
I’m a long time watcher and I just believed I’d drop by and say hello there for your very first time.
I came across your website and found it very interesting, now i visit it eveyday, but i noticed that it’s hard to find your blog in google, i found it on 16th spot, you should
create some hi PR backlinks to your website. When you will get to google top10 you traffic will increase drastically. I had the same problem with my site, your should search in google for this thread – How to climb right to the top of serps – it helped my site a lot
Thank you so much, I try to creat some high PR backlinks now, hope can help me, thank you for suggestion again.
fantastic publish, very informative. I wonder why the opposite experts of this sector don’t notice this.
You should continue your writing. I am confident, you have
a huge readers’ base already!
I see you share interesting content here, you can earn some additional
money, your blog has huge potential, for the monetizing method, just type in google – K2 advices
how to monetize a website
I read a lot of interesting posts here. Probably you
spend a lot of time writing, i know how to save
you a lot of time, there is an online tool that creates high quality, google friendly posts in seconds, just type in google – laranitas free content source
That’s the thnkiing of a creative mind