Basic Requirements for Material and Flanges

Basic requirements for Material and Flange
Requirements are valid for normal situation, in special you have to contact us to introduce.
Material Test basis / Requirements Delivery Condition
 C 22.8 (1.0460)  DIN 17243: 01.87 + VdTUEV – WB 350/3: 2009  +N
 DIN 17243: 01.87
 VdTÜV – WB 350/3: 2009
 P250GH (1.0460)  DIN EN 10222-2: 04.2000  +N
  National Annex
 P245GH (1.0352)  EN 10222-2:1999-12 + AC : 2000-02  +N
 A105N / C21  ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04  +N
  + VdTUEV399/3: 1996-09
  + NACE MR 0175: 2000
 A105N  ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04  +N
  + NACE MR 0175: 2000
 C21 (1.0432)  VdTUEV – WB 399/3: 1996-09  +N
 RSt 37-2 (1.0038)  DIN 17100: 1980-01  +N
 S235JR (1.0038)  DIN EN10025-2: 2005-04  +N
 16Mo3 (1.5415)  DIN EN10222-2:1999-12 + AC:2000-02  +N
 WStE355 / TStE355  DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06  +N or QT
  (1.0565 / 1.0566)
 P355NH  (1.0565)  DIN EN10222-4: 1998 + A1: 2002-12  +N
 WStE355 / P355NH  DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06  +N or QT
  (1.0565)   + DIN EN10222-4: 1998 + A1: 2002-12
    + DIN EN17103 :1989-10
    + DIN EN10222-4: 1998 + A1: 2002-12
 1.4301 (X5CrNi17-10)  DIN EN10222-5: 2000-02  +AT
 1.4306 (X2CrNi19-11)  DIN 17440:1996-09  +AT
 1.4401 (X5CrNiMo17-12-2)  DIN EN10222-5: 2000-02  +AT
 1.4404 (X2CrNiMo17-12-2)  DIN EN10222-5: 2000-02  +AT
 1.4432 (X2CrNiMo17-12-3)  DIN EN10222-5: 2000-02  +AT
 1.4541 (X6CrNiTi18-10)  DIN EN10222-5: 2000-02  +AT
 1.4571 (X6CrNiMoTi17-12-2)  DIN EN10222-5: 2000-02  +AT
 1.4541 / F321  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005  +AT
 1.4571 / F316Ti  DIN EN10222-5: 2000-02 / +ASTM A 240  +AT
 1.4404 / F316L  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005  +AT
 1.4306 / F304L  DIN 17440.1996-09 / +ASTM A 182/A 182M : 2005  +AT
 1.4307 / F304L  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005  +AT
Flange Test basis / Requirements
 DIN, Carbon Steel  DIN2519:1991-06
  + AD2000-W9: 02.04; -W13/ TRD107;TRB100;
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN, corrosion-resistant Steel  DIN2519:1991-06
  + AD2000-W9: 02.04; -W2; -W10 / TRD107; TRB100;
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Carbon Steel  DIN EN 1092-1: 2008-09
  + AD2000-W9; -W13/TRD107;TRB100
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Stainless Steel  DIN EN 1092-1: 2008-09
  + AD2000-W9; -W2; -W10/ TRD107; TRB100
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 ANSI  ASME B16.5:2003
 ASME B16.47:2006
Basic requirements for Material and Fitting
Requirements are valid for normal case, in special case you have to contact the technical department.
Material Test basis / Requirements Delivery Condition
 1.4541 (X6CrNiTi18-10)  DIN 17458:1996-09 +AT
 1.4571 (X6CrNiMoTi17-12-2)  DIN 17458:1996-09 +AT
Fittings Test basis / Requirements
 DIN2609 Stainless Steel  VdTUEV –MB 1252/ AD2000- W2; W10/TRD107;TRB100
 T-Piece  Directive 97/23/EG Annex I, Chap. 4.3:1998-02
 Bow  DIN2615-1
 Reducer  DIN2605-1